Available in Clear and Black
O-rings, gaskets and plug kit for the VapeSnail.
Clear kit stands for the kit as assembled on stock device. Clear foodgrade silicon are the gaskets / o-rings that are visible from outside and the rest vary based on their function.
Black kit includes black foodgrade silicon gaskets / o-rings regarding those that are visible from outside, while the rest vary based on their function.
VapeSnail Chamber & Chimney Reducer, made of 316 foodgrade stainless steel.
The VapeSnail comes with the C & C reducer pre-installed. This creates a restricted chamber and a narrow Chimney (D=2.5mm) suitable for MTL builds.
When removed, the chamber offers approx. 6.0mm coiling height and the chimney gets approx. 4.0mm inner diameter, with proper geometry to get all the clouds you want. The C&C Reducer actually offers you the potential of two different chamber and chimney geometries, thus two different single coil RTAs.
VapeSnail MTL Air Flow Pins Kit includes:
-One Air Flow Pin with Inner D=1.0mm
-One Air Flow Pin with Inner D=1.2mm
-One Air Flow Pin with Inner D=1.5mm
-One Air Flow Pin with Inner D=1.8mm
They reduce Positive Tube’s initial D=4mm down to D=1mm, D=1.2mm, D=1.5mm and D=1.8mm respectively, offering the ideal air flow for a substantial range of MTL vaping profiles.
An o-ring around their body allows easy installation plus perfect fitting inside the Pos Tube. The o-ring is black NBR or Sil70 clear/red, depending on availability.
On top there is an auxiliary laser engraving “1.0” , “1.2”, “1.5” and “1.8” standing for inner D= 1.0mm, 1.2mm, 1.5mm and 1.8mm respectively, to help you distinguish among the three small diameters.
VapeSnail MTL Air Flow Pins are made of 316 Stainless Steel.
VapeSnail Positive Post made of 316 Stainless Steel. Post screw included.
Set of 2 M2.5mm pan head phillips post screws for VapeSnail Positive Post and Negative Post, made of stainless steel.
Set of 10 Absorbent Pads of semi-synthetic fabric.
VapeSnail Fixed Air Flow Tubes in a kit.
The tubes serve as a replacement Positive Tube for loose MTL / RDL / DL configurations.
VapeSnail Fixed Air Flow Tubes in a kit, made of 316 Stainless Steel. O-ring included.
The tubes simple replace the pre-installed Positive Tube.
VapeSnail Fixed Air Flow Tubes Kit includes:
-One Fixed Air Flow Tube with Inner D=2.0mm
-One Fixed Air Flow Tube with Inner D=2.5mm
-One Fixed Air Flow Tube with Inner D=3.0mm
-One Fixed Air Flow Tube with Inner D=3.5mm
VapeSnail Chimney made of 316 Stainless Steel.
Positive Tube Insulator
VapeSnail Positive Tube Insulator made of PEEK thermoplastic polymer.
VapeSnail Positive Tube, made of 316 Stainless Steel. O-ring included. Also serves as a nest for the MTL Pins.
VapeSnail 510 Aux Base to facilitate rebuilding / dry burn.
Custom multi-purpose Tool which will help you with installation of AFC Tubes, assembly – disassembly of Positive Tube Insulator, but also to remove – restore the 510 adapter of your Billet Box / Boro compatible AIO.
VapeSnail Negative Post / Deck, made of 316 Stainless Steel. Includes custom silicon foodgrade Deck Gasket.
VapeSnail RBA for Billet Box available in 3 different colour finishes - original Stainless Steel, Gold and Midnight Black
Vapesnail Coloured Tank Kit available in Clear, Fuschia, Ultem Yellow, Smoked Black and Electric Blue